Skip to main content

TWRP Recovery on Galaxy Tab 2 P3100/P3110 [EffortLess Guide]

Tutorial - How to Install Custom TWRP Touch Recovery on Samsung Galaxy Tab 2 7.0 P3100/P3110 using odin with step by step guide. You can download TWRP Recovery file from end of post. We also attach a video tutorial about Install TWRP Recovery on Galaxy Tab 2 via Odin. How To install Android 5.0 Lollipop on the Galaxy Tab 2



Pre-Requirement
    • Backup your device data.
    • Make sure your device have at least 40% battery power.
    • Already have USB Driver Installed for Galaxy Tab 2.
    • Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and device.

    How to Install TWRP Touch Recovery on Galaxy Tab 2 7.0 P3100/P3110 Via Odin

    Step 1. Download Odin v3.09 and GT-P3100_TWRP_2.8.1.1.tar.md5 file from end of post.
    Step 2. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.

    Step 3. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.

    Step 4. Now, put the Galaxy Tab 2 in Download Mode by pressing and holding down the Volume Down button and the Power button together. A warning screen will come up; press Volume Up button to enter Download Mode.

    Step 5. Now run Odin3 v3.09.exe as an Administrator.

    Step 6. Now connect your device to your PC using USB cable. You will see an “Added!!” message in Odin’s message box. If you don’t get the same then you should try another USB port.. If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.

    Step 7. Click the AP Button, and select that downloaded TWRP_2.8.1.1.tar.md5 file according to your device model number.

    Step 8. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.

    Step 9. Double check everything that we mentioned in Step 7 & Step 8 above. Now, once satisfied hit the START button to begin the flashing process.

    Step 10. Once flashing completed, your Galaxy Tab 2 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

    Download here
    Odin - http://bit.ly/1LTGGyv
    P3110 - http://bit.ly/1LTHq6M
    P3100 - http://bit.ly/1LTGAqG

    Congratulation, You are done. We hope you like our tutorials. You can also check out How To Install Android 5.1 on Galaxy Tab 2.

    Comments

    1. in your video tutorial the twrp file is in zip format..but when i download it from link its not as in zip format..i cant flash the twrp recovery.. each and everytime its shows the same stock recovery..after flashed the file in odin..


      ReplyDelete
      Replies
      1. Download the twrp from Google play store and than download the latest version in the twrp app and flash it

        Delete
    2. It´s not working with my device (GT-P3110). After I had installed the TWRP using Odin, appers a green message PASS. But when try to Reboot into TWRP Recovery mode using Volume Up + Power key, then appears the reboot of android. Am doing something wrong?

      ReplyDelete
      Replies
      1. same thing happen to me please help

        Delete
      2. The GT is replacing the custom recovery by the android default recovery. To avoid that disable the auto reboot on options tab in the Odin. So when the Odin finishes the job it will not restart the GT and you must reboot manually oppening the TWRP by pressing Vol+ and Power buttons together. On my GT If I keep pressing power button the device keeps rebooting over and over again, so I had to release only the power button when the GT logo shows.
        This must be done only in the first boot, after that the device will not be able to revert to the default recovery.

        On TWRP create a backup of your custom rom and also create another backup of Nandroid and EFS and then save on PC.

        ;)

        Delete
    3. Será que sou o primeiro brasileiro a instalar essa rom no P3100? Rsrsrsrs

      ReplyDelete
    4. My Samsung Tab2 not able to connect with USB from couple of month .I tried too many thing to solve this but still same issue. In the case how to update my Andriod version ?

      ReplyDelete
    5. what is ignitor MDM admin how we got the code

      ReplyDelete

    Post a Comment

    Popular posts from this blog

    Fix Bootloop on any ASUS Zenfone 4, 5, 6, Selfie, Laser, etc

    Hello Guys In this tutorial i will showing you How to Fix Bootloop on ASUS Zenfone 4, 5, 6 , Selfie, Laser, Zenfone. If your device going in bootloop that means your device can not start or it's show ASUS logo and shutdown and reboot again and aging or it is showing boot animation continuously. That is means you have to fix bootloop issue on your zenfone.

    How to Fix Boot Loop on Asus Zenfone 5

    Tutorial - How to fix boot loop on Asus Zenfone 5. Now you can fix your Zenfone 5 from boot loop/ USB Logo by doing some simple steps. You needed some files like Drivers and firmware file, you can download it from end of post. We also attract a video Tutorial on Fix Boot loop on Zenfone 5. Also Check out One Click Root for Zenfone 4, 5, 6 and Zenfone 2 Lollipop and Kitkat Supported.

    How to Install Dolby Digital Atoms on Moto G4 Plus | G4

    Dolby Digital Atoms are a most famous sound equalization plugins. Till a few years ago Dolby Digital sound was available only on high quality home theater sound system, but now Dolby digital is also available for costly smartphones like MOTO M or Lenovo K5 Note. With Dolby Digital, You feel surround sound effect on your android phones when watching movies or listening music. But the sad part is that, this sound effect does not come with every device and In this tutorial I shall show you How to Install Dolby Digital Atoms on Moto G4 Plus and G4. Also check out List Of Moto Phones Getting Android O 8.0 Oreo Update

    Oreo 8.0 Asus Zenfone 5 T00J/T00F

    Hey Guys, Recently another developer shared another Oreo ROM for ASUS Zenfone 5 and Zenfone 6. At this time this Oreo Update is not stable and alpha version of Android Oreo 8.0 from xda developer tank. This builds create on latest Google Android 8.0.x source code with Linux 3.10.x kernel. Below you can read working features and bug's. This Oreo Update ROM tested with Zenfone 5 T00J/T00F but do it with your own risk and I am not responsible for any damage. If you think there is a bug in this ROM.

    Watch Video Tutorial on YouTube about How to Install Oreo on Zenfone 5

    Lineage OS Nougat ROM Zenfone 5 [Android 7.1.1 - How to Install]

    In preview post we talk about Lineage OS for Zenfone Max. Now, Today in this post we talk about Lineage OS Android Nougat ROM for ASUS Zenfone 5/6. Unfortunately, This is not an official update from Lineage OS and There are some bugs and error like FM Radio, GPS and playing some video file formate. Currently, This ROM status on the experiment so, maybe there are more bugs and issue. If you detect any bug or problem with this ROM, please share it with us and our other visitors. Please do it with your own risk, I am not responsible for any damage.